Conair CC-10 Specifications download pdf (Page 7)

7

3. To begin programming press the program

button (17). The light around the program

button will show a constant blue light.

4.

Press the

single espresso

button once to start the

espresso pour (18). The light

around the

single

espresso button will flash.

5.

Allow the espresso to pour

until it reaches the desired level. Once that is

reached, stop the espresso pour by pressing

the

single espresso button. A beep will

signify that the new setting for the

single

espresso operation has been programmed

and stored in the machine’s memory.

6.

The espresso machine will then return to

normal operation mode and is ready to make

another espresso at the push of a button.

Pr

ogramming

Double Espresso

1. Prepare the portafilter holder. Fit it with the

two-cup filter basket (12) and fill with finely

ground coffee (13). Using the tamping tool,

tamp the coffee grinds (14). Secure the

portafilter holder to the brew head (15-16).

2. Place two cups under both pouring spouts.

3

.

To begin programming press

the program button (17). The

light around the program

button will show a steady

blue light.

4

.

Press the

double espresso button once

to start the espresso pour (18). The light

around the

button will flash.

5. Allow the espresso to pour until it reaches the

desired level. Once that level is reached, stop

the espresso pour by pressing the

double espresso button. A beep will signify

that the new setting for the

double

espresso operation has been programmed

and stored into the machine’s memory.

6.

The espresso machine will then return to

normal operation mode and is ready to make

another espresso at the push of a button

Re

setting the Factory Settings

To revert to the original factory settings:

1. Press the program button once.

2.

Press and hold down the manual button

and program.

3.

Continue holding down manual and program

buttons for approximately 3 seconds or until

you hear 2 beeps. When you hear the 2

beeps, the light around the

and

buttons will flash, and after that, the program

light becomes solid. The espresso machine

has now returned to the original factory

settings and the next time the single or

double espresso functions are used the

espresso pours will be 1.5 and 3.0 oz.

4

.

The espresso machine will then return to

normal operation mode and is ready to make

another espresso at the push of a button.

GUIDE TO THE PERFECT

ESPRESSO

1. You may want to preheat the cups by filling

them with hot water, this will help preserve

the crema of the espresso.

Set the cups aside.

2.

Select the appropriate filter

basket and insert it into

portafilter handle (19).

TIP: Use the one-cup filter basket for a single

espresso, the two-cup filter basket for a double

espresso, and pod filter basket for an espresso

pod.

3

.

Using the measuring scoop,

spoon finely ground coffee in

the filter basket holder (20).

Use one scoop for one cup

and two scoops for two cups,

or place espresso pod in filter

basket.

4

.

Using the tamping tool, apply

a moderate packing pressure

(21). Add more coffee and

tamp again if necessary to

bring coffee to level.

5

.

Brush any excess coffee

grounds from around the edge of the filter

basket (22).

IM

PORTANT: Be sure not to overfill the filter

basket with coffee.

18

18

19

20

21

22

em200c_ib_BIL.indd 7 3/9/07 5:40:00 PM

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments