Conair A1-7.5 User Manual download pdf (Page 10)

EMC Report No: 3109178NYM-005

Page 10

5.1.2 EN 61000-3-2/-3-3, Harmonics and Flicker Testing

The EUT is placed on a non-conductive surface at least 0.8 meters from a ground plane. The test duration, is

dependant on the cycle time of the EUT. During the harmonic current tests the duration is at least 10 minutes.

During the flicker tests the short term flicker measurements occur at a 10 minute interval for a maximum of

one cycle of the EUT or 2 hours, whichever comes first. If the EUT does not have a specific cycle then the

EUT is operational for 2 hours.

EUT

Rn jXn

Figure 5.1.2 Harmonic and Flicker Testing Configuration

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

No comments

Conair A1-7.5 User Manual Page 10